Dissolvine®
Dissolvine® E - FE
Main Characteristics: Dissolvine® E-Fe is a stable, water-soluble iron chelate;Iron is chelated by EDTA.Product analysis
Chemical Name : Ethylenediaminetetraacetic acid ferric-sodium complex; EDTA-FeNa.3H2OChemical Formula : C10H12N2O8FeNa.3H2O Ethylenediaminetetraacetic acid zinc-disodium complex; EDTA-ZnNa2 Molecular Weight 421.1Application :
For foliar, side and top dressing, and for Hydroponics
Appearance :
Yellow green crystals
pH (1% solution) :
4 - 5.5
pH Stability range :
2 –10
Bulk density untapped :
approx. 900 - 1,000 kg/m3
Solubility in water :
approx. 90 g/l (20 ºC), 120 g/l (30 ºC),300 g/l (70 ºC)
Dissolvine® Q {Fe-EDDHA (6% Fe)}
Main Characteristics: Dissolvine ® Q is a stable, water-soluble and non-dusting iron chelate Iron is chelated by EDDHA.Dissolvine® Q is a product developed for usage on iron deficient soils with wide range of pH ranging from 3-10. It has an excellent performance in alkaline high pH Soil where EDTA will not work.When the pH near the roots is rising to 7.5 or higher, or when the water used contains very high levels of zinc, it is advised to use Dissolvine® QProduct analysis
Chemical Name : Ethylenediamine-N,N'-bis(2-hydroxy-phenylacetic acid) ferric-sodium complex; EDDHA-FeNaApplication :
In agriculture and horticulture for soil and hydroponics
applications
Appearance :
Dark red-brown micro granules
pH (1% solution) :
7 - 9
pH Stability range :
3 –10
Bulk density untapped :
approx. 500 - 700 kg/m3
Solubility in water :
60 g/l (for practical use)
Dissolvine® D 12
Main Characteristics: Dissolvine® D 12 is a stable, water-soluble iron chelate; Iron chelated by DTPADissolvine® D 12 is a product developed for usage on iron deficient soils with acid to neutral pH and for iron deficient crops through foliar application. Foliar application is recommended when the soil is neutral to alkaline or when soil application is impossible for other reasons. It has an excellent performance in hydroponics systems. Dissolvine® D 12 contains 116 grams iron per kg of product as Fe-sodium-DTPA derived from diethylenetriaminepentaacetic acid.Never bring Dissolvine® D 12 in direct contact with concentrated acids. Dissolvine® D 12 is stable between pH 1.5 - 7.5. Use chelated zinc, manganese and copper if these elements are dissolved in the same tank. Keep the solution in the dark and use it within one or two weeks. Check the Fe-level after recirculation and add extra Dissolvine® D 12 if necessary.When the pH near the roots is rising to 7.5 or higher, or when the water used contains very high levels of zinc, it is advised to substitute half of the Fe-DTPA by Fe-EDDHMA (or a high quality Fe-EDDHA).Product analysis
Chemical Name : Diethylenetriaminepentaacetic acid ferric-sodium hydrogen complex; DTPA -FeHNa chelatedApplication :
For foliar, side and top dressing, and for Hydroponics
Appearance :
Yellow Green Crystals
pH (1% solution) :
2. 5 - 3.5
pH Stability range :
1.5 –7.5
Bulk density untapped :
approx. 650 - 750 kg/m3
Solubility in water :
approx. 110 g/l (20 °C), 160 g/l (50 °C) (at pH as such)
Dissolvine® E - Zn
Main Characteristics: Dissolvine® E- Zn is a stable, water-soluble and Non-dusting Zinc EDTA chelateProduct analysis
Chemical Name : Ethylenediaminetetraacetic acid zinc-disodium complex; EDTA-ZnNa2Application :
For foliar, side and top dressing, and for Hydroponics
Appearance :
White micro granules
pH (1% solution) :
6 - 7
pH Stability range :
2 – 10
Bulk density untapped :
approx. 800 - 1000 kg/m3
Solubility in water :
approx. 1000 g/l (20 °C), 1120 g/l (80 °C)
Dissolvine® Cu
Main Characteristics: Dissolvine® Cu is a stable, water-soluble and non-dusting copper chelate; Copper is chelated by EDTAProduct analysis
Chemical Name : Ethylenediaminetetraacetic acid copper-disodium complex; EDTA-CuNa2Application :
For foliar, side and top dressing, and for Hydroponics
Appearance :
Blue micro-granules
pH (1% solution) :
6 - 7
Bulk density untapped :
approx. 600 - 800 kg/m3
Solubility in water :
approx. 1,200 g/l (20 ºC), 1,700 g/l (80 ºC)
Dissolvine® Ca
Main Characteristics: Dissolvine® Ca is a stable, water-soluble and non-dusting calcium chelate; Calcium is chelated by EDTAProduct analysis
Chemical Name : Ethylenediaminetetraacetic acid calcium-disodium complex; EDTA-CaNa2.2H2OApplication :
For foliar, side and top dressing, and for Hydroponics
Appearance :
Free flowing white micro-granules
pH (1% solution) :
6.5 - 7.5
Bulk density untapped :
approx. 650 - 850 kg/m3
Solubility in water :
approx. 800 g/l (20 ºC), >1,500 g/l (80 ºC)
Dissolvine® Mn
Main Characteristics: Dissolvine® Mn is a stable, water-soluble and non-dusting Manganese ETDA chelateProduct analysis
Chemical Name : Ethylene diaminetetraacetic acid manganese- disodium complex; EDTA-MnNa2Application :
foliar, through drip, side and top dressing, and for
Hydroponics
Appearance :
Off white micro granules
pH (1% solution) :
6 - 7
pH Stability range :
3 –10
Bulk density untapped :
approx. 600 - 800 kg/m3
Solubility in water :
approx. 800 g/l (20 °C), 1,200 g/l (80 °C)
Dissolvine® Mg
Main Characteristics: Dissolvine® Mg is a stable, water-soluble and non-dusting Magnesium ETDA chelateProduct analysis
Chemical Name : Ethylenediaminetetraacetic acid magnesium-disodium complex; EDTA-MgNa2Application :
foliar, through drip, side and top dressing, and for
Hydroponics
Appearance :
white micro granules
pH (1% solution) :
6.5 - 7
Bulk density untapped :
approx. 600 - 800 kg/m3
Solubility in water :
approx. 900 g/l (20 °C)
Product Analysis Summary of Non-Mixture Micro Nutrients
Nutrient Chelating Agent
Typical*%
Minimum %
Iron (Fe) EDTA
13.3%
13.3%
Iron (Fe) EDDHA
6%
5.7%
Iron (Fe) DTPA
11.6%
11.3%
Zinc (Zn) EDTA
14.8%
14.5%
Copper (Cu) EDTA
14.8%
14.5%
Calcium (Ca) EDTA
9.7%
9.5%
Manganese (Mn) EDTA
13%
12.4%
Magnesium (Mg) EDTA
6.2%
6%
Micro Nutrient - Mixture
Why micronutrients are combined ?
Deficiencies clearly caused by a single element should be cured by applying this lacking element. Soil or substrate analysis or leaf tissue analysis do help in obtaining information about the nutritional conditions of the crop. Due to interactions of the nutrients in the plant a certain visual deficiency symptom can not always be assigned to just one missing nutrient. When mixed in NPK fertilizers Dissolvine® CXK prevents interactions of the micronutrients because micronutrients are fully chelated.Dissolvine® CXK & CXK II
Main Characteristics: Dissolvine® CXK is a stable, water-soluble and non-dusting mixture of metal chelates; Iron, manganese, copper, zinc are present in a chelated form.Dissolvine® CXK is a combination of the chelated micronutrients Fe, Mn, Cu, Zn and K, B, Mo in one single microgranule and is developed for the correction and prevention of general micronutrient deficiencies in a wide range of agricultural and horticultural crops, but especially for crops growing on zinc deficient soils. Dissolvine® CXK is developed for usage as foliar fertilizer, but can also be soil applied.Dissolvine®CXK micronutrients are chelated by EDTA, ethylenediaminetetraacetic acid. Dissolvine® CXK contains 42 grams zinc as Zn-EDTA per kg product. Other micronutrients apart from boron, molybdenum and magnesium are also chelated by EDTA.Dissolvine® combi products contain a range of chelated micronutrient formulations with their own specific metal contents and ratios
Product analysis
Application :
Foliar feeding for fruit, vegetable, flower and arable crops,
especially in zinc deficient areas. Also suitable for soil
applications and in mixes with NPK fertilizers for
nutrigation
Appearance :
Green micro granules
pH (1% solution) :
5 - 6.5
pH Stability range :
3 – 6.5
Bulk density untapped :
approx. 600 - 700 kg/m3
Contains approx. 10.0% Potassium (K) (12.0% as K2O)Solubility in water approx. 800 g/l (20 °C), 1,200 g/l (80
°C)Storage: Store in original package in a dry place at ambient
temperature (below 25°C). It is advised to re-test after three years
of storage. Exposure to sunlight may cause degradation of the
product.
Product Analysis of CXK and CXK II
Nutrient Chelating Agent
Typical* % for CXK
Typical* % for CXK II
Boron Inorganic
1.5
0.5
Copper (Cu) EDTA
0.5
1.0
Iron (Fe) EDTA
3.4
2.5
Magnesium (Mg) Inorganic
1.2
0
Manganese (Mn) EDTA
3.2
1.0
Molybdenum (Mo) EDTA
0.05
0.1
Zinc (Zn) EDTA
4.2
3.0